Engineering Specification, 2000 ton Wheel Dishing Press (O/No. 57730)
2000 ton Wheel Dishing Press (O/No. 57730)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
|Specification:||2000 ton downstroking wheel dishing press|
|Main Characteristics:||Power at max. working pressure||2000 tonf|
|Main ram diameter||44″|
|Main ram stroke||2′ 0″|
|Daylight between main ram crosshead face and anvil slide||5′ 0″|
|Column centres||6′ 3″ L to R 5′ 0″ F to B|
|Working diameter of columns||12 1/2″|
|Combined power of two drawback rams||160 tonf|
|Diameter of drawback rams||10 1/2″ dia. /5 1/2″ dia.|
|Stroke of anvil slide||5′ 6″|
|Power of anvil slide – feed-in cylinder||23 tonf|
|Power of anvil slide – withdrawal cylinder||19 tonf|
|Working Pressure:||3000 psi max.|
|Medium:||Water, with 2% soluble oil (from an air/water hydraulic accumulator system)|
|Weight:||Estimated 140 tons|
This specification was kindly provided by Rhodes Interform