Engineering Specification, 2000 ton Dishing & Flanging Press (O/No. 57570)
2000 ton Dishing & Flanging Press (O/No. 57570)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
|Sprcification:||2000 ton Dishing and Flanging Press|
|Capacity:||Say 6″ thick (hot), 9′ 0″ diameter based on steel 28/32 ton UTS (Ultimate Tensile Stress)|
|Main Characteristics:||Number of main rams||4|
|Stroke||4′ x 0″|
|Daylight (open)||10′ 0″|
|Height above floor level||14′ 0″|
|Bolsters||11′ 0″ square|
|Working Pressure:||4480 psi.|
|Accumulator Capacity:||110 gallons|
|Pumps:||Two ‘Fielding’ H3 hydraulic pumps, each with 75 HP motors|
|Return||2 – 3 in/s|
|Anvil traverse||10′ 0 in/m|
This specification was kindly provided by Rhodes Interform