Engineering Specification, 1000 ton Vertical 'Serck' Extrusion Press (O/No. 58270)
1000 ton Vertical 'Serck' Extrusion Press (O/No. 58270)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
Specification: | 1000 ton vertical ‘Serck’ extrusion press | |
Process: | The press is suitable for operating on the indirect process to produce tubes and solid extrusions | |
Main Characteristics: | Main ram power | 1000 tonf |
Stroke of main ram | 28″ | |
Billet diameter x length | 5″ x 10″ long | |
Container size | 5 1/8″ dia. x 12 1/2″ long | |
Working Pressure: | 3000 psi | |
Medium: | Lubricated water supplied from an Air/Water accumulator system | |
Supply Content: | Prefilling tank, operating valves, interconnecting piping, one set of auxiliary tools comprising one container, one container liner and one hollow-die support | |
Discard Punch provided for severing tube from the discard | ||
Item 2 | One set of auxiliary tools for 6″ dia. billets comprising one container, one container liner and one hollow-die support | |
Item 3 | High pressure junction blocks, stop valves and high and low pressure piping | |
Item 4 | One billet loader of the mechanical type | |
This specification was kindly supplied by Rhodes Interform
No Comments
Add a comment about this page