Engineering Specification, 280 ton Multi-Daylight Veneer Press (O/No. 5590/55)
280 ton Multi-Daylight Veneer Press (O/No. 5590/55)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
Specification: | 280 ton multi-daylight veneer press | |
Main Characteristics: | Power of press | 280 tonf |
Size of platens | 79″ x 40″ x 1 3/4″ thick | |
Number of platens | 11 | |
Number of daylights | 10 | |
Daylight openings | 2 3/8″ | |
Stroke of rams | 23 3/4″ | |
Specific pressure of platen area | 195 psi | |
Number of rams | 6 | |
Number of power saving rams | 2 | |
Dimensions: | Height of bottom opening above floor level | 55 1/8″ |
Working Pressure: | 4500 psi | |
Pump: | Fraser Mono-Radial, single-stage pump, delivering 5 gal/m at full pressure | |
Motor: | 12 1/2 HP x 940 rpm | |
Electrical Supply: | 220/380 volts, 3 phase, 50Hz, screen protected, squirrel cage motor | |
Speeds: | Closing time | 10 seconds |
Pressing speed | 2.4 in/s | |
Estimated Weight: | 18 1/2 tons | |
No Comments
Add a comment about this page