Engineering Specification, 350 ton Tubular Cold Forming Press (O/No. 59780)
350 ton Tubular Cold Forming Press (O/No. 59780)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
Specification: | A range of ‘Fielding’ cold forming presses | ||||||
Process: | For the cold forming of metal components on flow-line production principles | ||||||
Power of press in tonf | Main ram approach speed in/s | Main ram pressing speed in/s | Main ram return speed in/s | Ejector speed ‘UP’ in/s | Ejector speed ‘DOWN’ in/s | Pump size | HP |
150 | 6.1 | 0.17 | 3.4 | 3.4 | 14.7 | M180/G2 | 10 |
250 | 6.1 | 0.17 | 3.4 | 3.4 | 14.7 | M180/G2 | 15 |
350 | 6.1 | 0.17 | 3.4 | 3.4 | 14.7 | 2H180/G2 | 20 |
500 | 6.1 | 0.17 | 3.4 | 3.4 | 14.7 | 4H180/G2 | 30 |
700 | 4.5 | 0.087 | 1.65 | 1.65 | 9.8 | 2H180/G2 | 20 |
1000 | 4.5 | 0.087 | 1.65 | 1.65 | 9.8 | 3H180/G2 | 30 |
Pumps: | Supplied by Towler Bros. | ||||||
Motors: | Brook, drip-proof, continuously rated, horizontal, flange mounted, squirrel cage, induction motor | ||||||
Starter: | Wall fixing,air break, direct-on-line, non-reversing, incorporating main contactor and three magnetic overload releases with time lags, plus off-load isolator | ||||||
Voltage: | 400/440 volt, 3 phase, 50 Hz supply | ||||||
This specification was kindly provided by Rhodes Interform
No Comments
Add a comment about this page