Engineering Specification, 150 ton Mobile Rail Manipulator (O/No. 57260)
150 ton Mobile Rail Manipulator (O/No. 57260)
This page contains a précis of the Engineering Specification for the machine stated above (as originally supplied).
Click here to see a photograph of this machine.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
Specification: | 150 ton mobile rail manipulator | |
Process: | For the straightening of steel railway lines | |
Main Characteristics: | Power of vertical ram | 150 tonf |
Power of horizontal ram | 75 tonf | |
Height from track to working face of bottom dies | 3′ 7 1/2″ | |
Width of track | 4′ 8 1/2″ | |
Distance from inside edge of front rail to track to centre line of rail being straightened | 1′ 3 3/4″ | |
Maximum centres of dies | 3’3 1/2″ | |
Minimum centres of dies | 1 1/2″ | |
Height of horizontal resistance beam above working level of bottom die | 5 1/4″ | |
Working Pressure: | 2000 psi | |
Medium: | High grade mineral oil | |
Pump & Motor: | 12 HP, 400/440 volts, 3 phase, 50 Hz, totally enclosed motor, running at 1450 rpm | |
Starter: | 12 HP, 400/440 volts, 3 phase, 50Hz, hand operated, direct switching starter | |
Including all necessary high & low pressure piping with adjustable relief valves, pressure gauge & control valves, rail support rollers, electrical wiring between starter and motor, dies, wire mesh lifting & lowering guards, pressure gauges | ||
Speeds: | Vertical ram approach | 200 in/m |
” ” pressing | 11 in/m | |
” ” return | 162 in/m | |
Horizontal ram approach | 44 in/m | |
” ” pressing | 22 in/m | |
” ” return | 165 in/m | |
Option: | Can be supplied without flanged wheels, with holding-down bolts (for fixed location) | |
This specification was kindly provided by Rhodes Interform
No Comments
Add a comment about this page