Engineering Specification, 1200 ton Downstroking Flanging Press (O/No.57700

1200 ton Downstroking Flanging Press (O/No.57700)

This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).

Click here to see photographs of this press.

If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.

Specification:1200 ton self-contained downstroking flanging press
Main Characteristics:Number of main rams6
Power of each main ram200 tonf
Combined power of two drawback rams200 tonf
Stroke8′ 0″
Daylight11′ 6″ (press open)
Column centres17′ 1″ L to R, 6′ 9″ F to B
Bolster diameter14′ 0″ on bottom table
Moving table bolster diameter11′ 0″
Height above floor level (approx.)38′ 6″
Working Pressure:4480 psi
MediumHigh grade mineral oil
Speeds:Approach8 in/s
Pressing at 1200 tonf1 in/s
Pressing at 800 tonf1.5 in/s
Pressing at 400 tonf3 in/s
Return6.1 in/s
All ejectors (approach)7.5 in/s
All ejectors (pressing)1 in/s
Radial ejectors only (approach)9.4 in/s
Radial ejectors only (pressing)1.25 in/s
Centre ejector only5 in/s on both approach and pressing
Pumps:Three – Towler 5H430/5H430 pumps
One – Towler X1250/G200 pump
Motors:One – 200 HP double-shaft motor
One – 100 HP single shaft motor
One – 12.5 HP single shaft motor
Starters:Floor mounted, totally enclosed, hand operated, oil immersed star/delta starters
Control Valves:Hand operated

This specification was kindly supplied by Rhodes Interform

No Comments

Start the ball rolling by posting a comment on this page!

Add a comment about this page

Your email address will not be published.