Engineering Specification, 12" 'Fielding' Heavy-Duty Cube Baler (O/No. 64280)

12" 'Fielding' Heavy-Duty Cube Baler (O/No. 64280)

This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).

Click here to see photographs of this press.

If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.

Specification:The ‘Fielding’ self-contained, triple-compression scrap metal baling press
Main Characteristics:Size of box49″ x 24″ x 23″ deep
Depth of box when cover closed12″
Size of bale  (variable according to type of scrap)12″x 12″ x 10″-13″
Weight of bale      (dependant on type of material)100/120 lbs
Output per hour   (         ”          ”    ”     ”        ”      )50/60 bales
Production per hour  (    ”         ”    ”     ”        ”      )44-64 cwt/hr
Preliminary cover ram pressing power83 tonf
Specific pressure on material8 tonf/sq. ft.
Secondary ram pressing power83 tonf
Secondary specific pressure on material41.5 tonf/sq. ft.
Final ram pressing power83 tonf
Stroke of final ram41″
Final specific pressure on material83 tonf/sq. ft.
Medium:High grade mineral oil
Pumping equipment:hydraulic oil is supplied from a two-stage, high-speed pump mounted above the supply tank and driven directly from an electric motor.  The pump is fitted with an automatic device to by-pass the low pressure supply when high pressure is developed.  A suitable oil level gauge is mounted in a convenient position and a low pressure isolating valve is provided between the tank and pump section.
Controls and Valves:‘Fielding’ lapped spindle valves, air operated, automatically controlled, plus air button control of each ram movement.
Electrics:400/440 volts, 3 phase, 50Hz supply

This specification was kindly provided by Rhodes Interform

No Comments

Start the ball rolling by posting a comment on this page!

Add a comment about this page

Your email address will not be published. Required fields are marked *