Engineering Specification, 1300 ton Horizontal 'Package Type' Extrusion Press (O/No. 63510)

1300 ton Horizontal 'Package Type' Extrusion Press (O/No. 63510)

This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).

Click here to see photographs of this press.

If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.

Specification1300 ton horizontal ‘package-type extrusion press
Process:For the production of solid and hollow aluminium extrusions
Construction:Inverted three-column, package type
Main Characteristics:Total press power1300 tonf
Low tonnage power1170 tonf
Stroke of the main ram62″
Container stripping power195 tonf
Container sealing power125 tonf
Vertical shear power36 tonf
Die slide in16 1/2 tonf
Die slide out11 1/2 tonf
Maximum billet diameter7″
Maximum billet length24″
Length of container25 1/2″
Speeds:Maximum ram speed during extrusion: –
At rated tonnage46.5 in/m
At low tonnage52 in/m
Working Pressure:3000 psi
Medium:High grade mineral oil
Pumping Equipment:One – Oilgear DV150
One – Oilgear DV100
(both at max. working pressure 3000 psi for 10% cycle time, normal pressure 2800 psi
Auxiliary Pumps:One – Dynex piston pump, type PF 6007-12-00, 2 gal/m @4500 psi.
One – Vickers double-vane pump, 15 gal/m @300 psi. and 7 gal/m @ 500 psi
Recommended Main Motors:One – 200 HP and one – 150 HP, 985 rpm, drip-proof, squirrel cage motors
Recommended Auxiliary Motors:One – 15 HP double-shaft, 960 rpm drip-proof, squirrel cage motor
Starters:Main – Two automatic air-break, star/delta starter
Auxiliary – one pushbutton operated direct switching starter
Container Heating:Electric resistance type
Dead Cycle Time:14 seconds approximately,  including 4.5 seconds die lubrication within this time

This specification was kindly supplied by Rhodes Interform

No Comments

Start the ball rolling by posting a comment on this page!

Add a comment about this page

Your email address will not be published. Required fields are marked *