Engineering Specification, 1450 ton Vertical 'Serck' Extrusion Press (O/No. 61280)
1450 ton Vertical 'Serck' Extrusion Press (O/No. 61280)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
Specification: | 1450 ton vertical ‘Serck’ extrusion press | |
Process: | For the production of tubes and hollow sections in copper and brass from drilled and turned billets, by the indirect extrusion process | |
Main Characteristics: | Power of main ram | 1450 tonf |
Stroke of main ram | 36″ | |
Maximum pressing stroke | 16″ | |
Container bore | 8″ dia. | |
Working Pressure: | 3000 psi | |
Medium: | Lubricated water (from an air/hydraulic accumulator system – NOT INCLUDED) | |
Also Included: | Equipment for the extrusion of rods and solid sections by the direct extrusion press, comprising container sealing & unsealing cylinders, also horizontal shear cylinder for removal of the discard | |
Control valves, self-contained piping, prefill tank, air tank and stirrup gear for press itself. Necessary self-contained piping and control valve for operation of container sealing and unsealing cylinders | ||
This specification was kindly provided by Rhodes Interform
No Comments
Add a comment about this page