Engineering Specification, 1600/80 ton Horizontal Hydrostatic Extrusion Press (O/No. 65630)
1600/80 ton Horizontal Hydrostatic Extrusion Press (O/No. 65630)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
|Specification:||1600/80 ton Horizontal Hydrostatic Extrusion Press|
|Main Characteristics:||Main ram power, plus approach||1600 tonf|
|Ram augmented power||155 tonf|
|Main extrusion container bore||4 3/4″ dia.|
|Maximum length of billet for main container||20″ parallel|
|Hydrostatic pressure in main container||81 tonf/sq.inch|
|Total length of main extension cylinders||12′ 0″ approx.|
|Total length of back pressure cylinders||20′ 0″ approx.|
|Speeds||Pressing speed of main ram||3/4 in/s.|
|Controls:||Press complete with controls, electrics, Towler pumps, motors and starters, necessary piping and initial fill of oil|
This specification was kindly provided by Rhodes Interform