Engineering Specification, New High-Speed Triple-Compression Shearer/Baler (O/No. B76330)
New High-Speed Triple-Compression Shearer/Baler (O/No. B76330)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
Specification: | High-speed triple-compression scrap metal baler | |
Main Characteristics: | Power of gathering ram | 70 tonf |
Return power of gathering ram | 35 tonf | |
Stroke of gathering ram | 66″ | |
Power of secondary ram | 115 tonf | |
Return power of secondary ram | 56 tonf | |
Stroke of secondary ram | 13″ | |
Power of final ram | 115 tonf | |
Return power of final ram | 56 tonf | |
Stroke of final ram | 45″ | |
Power of door cylinder | 20 tonf | |
Return power of door cylinder | 10 tonf | |
Stroke of door cylinder | 14″ | |
Power of shear block ram | 220 tonf | |
Box opening | 36″ x 48″ | |
Box size | 36″ wide x 78″ long x 24″ deep | |
Bale size | 12″ x 12″ x variable | |
Time cycle: | Approx. 23 1/2 seconds, excluding filling | |
Working Pressure | Hydraulic | 2240 psi |
Shear hold | 4480 psi | |
Air servo | 80/100 psi | |
Medium: | High grade mineral oil | |
Tank: | Supply tank | 1000 gal |
Pump Units: | Two – Vickers vane pumps, type 4535V60A38-1CC10-132 delivering: – | |
1st stage | 190 gal/m @620 psi | |
2nd stage | 153 gal/m @720 psi | |
3rd stage | 95 gal/m @1200 psi | |
4th stage | 37 gal/m @2240 psi | |
One – Towler high speed pump, type g1/2 delivering: – | 2.2 cu. in/s @4480 psi | |
Filter/Cooling: | Tank mounted on-line filters with cooling cooler and circulating pump quoted as an extra | |
Motors: | One 100 HP drip proof, squirrel cage, double shaft running at 1440 rpm | |
One – 3 HP drip proof, squirrel cage motor running at 1440 rpm | ||
Starters: | One – 100 HP Automatic Star/Delta starter | |
One – 3 HP starter | ||
Controls: | Lapped spindle, air actuated, remote pushbutton | |
Lubrication: | Hand gun only | |
Electrical Supply: | 400/440 volts, 3 phase, 50 Hz | |
This specification was kindly provided by Rhodes Interform
No Comments
Add a comment about this page