Engineering Specification, 1500 ton Hydraulic Chassis Frame Flanging Press (O/No. 6775/32)
1500 ton Hydraulic Chassis Frame Flanging Press (O/No. 6775/32)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied, with the exception of the hydraulic and electrical systems, that may have been replaced in 1945).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
Specification: | 1500 ton hydraulic chassis frame flanging press | |
Main Characteristics: | Number of main rams | 3 |
Power of main rams | 1500 tonf | |
Power of return rams | 154 tonf | |
Stroke of rams | 3′ 0″ | |
Number of ejector rams | 12 | |
Stroke of ejector rams | 7 1/2″ | |
Power of ejector rams | 199 tonf (gross) | |
Daylight | 3′ 0″ | |
Length of table | 30′ 0″ | |
Width of table – between columns | 6′ 0″ | |
Dimensions: | Overall dimensions | 9′ 10 1/2″ x 30′ 0″ x 24′ 6″ high |
Table face above floor level | 1′ 6″ | |
Working Pressure: | 4500 psi | |
Medium: | High grade mineral oil | |
Tank: | 500 gal, air-charged, prefilling and pump supply | |
Pump: | One – Fraser Mono Radial pump, type OLS 25 delivering 25 gal/m @ 4500 psi | |
Motor: | One – 80 HP, totally enclosed, squirrel cage motor, running at 720 rpm | |
Starter: | One – 80 HP starter | |
Controls: | One – hand operated, three position control valve for main ram | |
One – hand operated, three position control valve for ejector | ||
Speeds: | Main ram approach | 4 in/s |
Main ram pressing | 0.13 in/s | |
Main ram return | 1.3 in/s | |
Ejectors | 1 in/s | |
Weight: | 200 tons, including pump unit, tank, valves & piping | |
This specification was kindly provided by Rhodes Interform
No Comments
Add a comment about this page