Engineering Specification, 400 ton Treble-Action Deep-Drawing Press (O/No. 3300/51)
400 ton Treble-Action Deep-Drawing Press (O/No. 3300/51)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
Specification: | 400 ton self-contained treble-action deep-drawing press | |
Main Characteristics: | Power of main ram | 400 tonf |
Stroke of main ram | 25″ | |
Daylight between slide and bolster face | 60″ | |
Shut height of press | 35″ | |
Total blankholder power of 6 – cylinders, arranged in main slide | 100 tonf | |
(This gives a net drawing power of 300 tonf when the full power of 100 tonf is being used) | ||
Stroke of the blankholder rams | 17″ | |
Dimension of table | 9′ 0″ x 5′ 0″ | |
Number of die cushion cylinders | 4 | |
Upward die cushion power | 120 tonf | |
Stroke of die cushion rams | 15″ | |
Pump: | The pump is a ‘Fielding’ oil hydraulic high speed radial pump | |
Pressure: | 4480 psi maximum | |
Motor: | 90 HP x 1460 rpm | |
Electrics: | Electrical equipment suitable for AC, 3 phase, 50 Hz supply | |
This specification was kindly provided by Rhodes Interform
No Comments
Add a comment about this page