Engineering Specification, 2500 ton Forging Press, (O/No. 5655/47)
2500 ton Forging Press (O/No. 5655/47)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
| Specification: | The press is of the four-column type suitable for die-forging as well as general forging work | |
| Main Characteristics: | Main ram power | 2500 tonf |
| Main ram stroke | 4′ 0″ | |
| Drawback ram power | 100 tonf | |
| Ejector power | 75 tonf | |
| Ejector drawback power | 15 tonf | |
| Ejector stroke | 380 mm | |
| Dimensions: | Daylight | 1520 mm or 2050 mm |
| Column centres | 8′ 0″ x 4′ 3″ | |
| Space on moving table | 1520 mm or 1220 mm | |
| Space on bottom table | 1520 mm x 1980 mm | |
| Working Pressure: | 6000 psi | |
This specification was kindly provided by Rhodes Interform
No Comments
Add a comment about this page